Configuring VPN 1.1.1.1 and WireGuard

We recommend using WireGuard, the native software from warp+ is not stable. But if you want to use it, this guide on how to use it is below. (show)

WireGuard setup

1. Download WireGuard and install it.
2. Download the programmes that will generate the config file for WireGuard download. IMPORTANT: These files must be in the same folder. (*if you downloaded in an archive, unzip it)
3. After purchase, you will receive a key (sample key "05BJ26aT-4VZ5NAFk-593ufo4L")
4. Run warp_config.exe or the script warp_config_generator.ps1 via PowerShell.
5. Copy and paste your key, without spaces or extra characters, making sure you copy it exactly right.
6. Press "Enter"
7. Wait for the script/software to create the *_Warp+.conf file. You can then close the script/programme.

8. Switch on WireGuard, click "Add tunnel" and specify the path to the *_Warp+.conf file. Which you previously created.
9. Press the 'Connect' button.  To check, open any page of the website and refresh it to make sure you have an internet connection.

10. For MAC OS the connection is similar.
11. If you do not have a windows PC, to create a config file, contact our group vk to have the *_Warp+.conf file created for you or in the purchased product, in correspondence with the seller.

Configuring the WireGuard mobile app

1. Download WireGuard from google play market or apple app store
2. Download the *_Warp+.conf file you previously created. You can transfer the file via telegram, upload to favourites and download it from your mobile device.
3. Add the *_Warp+.conf file and move the connection slider, to the active position.
4. To check, open any page of the website and refresh it to make sure you have an internet connection. If you don't, which is most often the case with android phones, turn off the VPN, check the connection to the Internet and re-enable the VPN. Again, recheck your internet connection.

Connecting via Cloudflare WARP

Through this programme, you don't need to generate anything, just one key.

1. Download the software Cloudflare WARP and install
2. After purchase, you will receive a key (sample key "05BJ26aT-4VZ5NAFk-593ufo4L")
3. Press "Gear" => "Settings".
4. In the window that opens, click on "Account" and "Use another key"
5. Enter your key that you were given after purchase and press "ok"
6. If it tells you the key is not correct. Download any other free or heavily restricted VPN on PC. *not in your browser. Connect to a third party VPN and enter your key, in Cloudflare WARP software, then the key registration will go through. The free VPN is no longer needed, disable it and you can delete it.
7. Close all the windows.
8. In Cloudflare WARP, move the connection slider to the active position.
9. To check, open any page of the website and refresh it, to make sure you have an internet connection.

Setting up the Cloudflare WARP mobile app

1. Download the software Cloudflare WARP, install it on your mobile device
2. Switch on the app.
3. Click on the three bars at the top of the app, select warp so that it is active.
4. Click on "Account" => "Key" => "Change key" => Enter your key that you were given after purchase (sample key "05BJ26aT-4VZ5NAFk-593ufo4L") and click save.
5. Go back to the home page of the application and move the connection slider to the active position, wait for the application to connect to the VPN. The message "Connected. Your internet connection is private."
6. To check, open any page of the website and refresh it to make sure you have an internet connection. If you don't, which is most often the case with android phones, turn off the VPN, check the connection to the Internet and re-enable the VPN. Again, recheck your internet connection.